How to configure system time of Archer C2_V5?

This page allows you to set the time manually or to configure automatic time synchronization. The Router can automatically update the time from an NTP server via the internet.

Note: Archer C2_V5 is used for demonstration in this article.

1. Login the router. For how to do that, please refer to How to log in to the web-based interface of Wi-Fi Routers (new logo)?

2. Go to System Tools > Time Settings.

To set time manually:

1. Select your local Time Zone.

2. Enter the Date in Month/Day/Year format.

3. Enter the Time in Hour/Minute/Second format.

4. Click Save.

To set time automatically:

1. Select your local Time Zone.

2. Enter the address or domain of the NTP Server I or NTP Server II.

3. Click Get GMT to get time from the internet if you have connected to the internet.

To set Daylight Saving Time:

1. Select Enable DaylightSaving.

2. Select the start time from the drop-down list in the Start field.

3. Select the end time from the drop-down list in the End field.

4. Click Save.

Note: This settings will be used for some time-based functions such as firewall. You must specify your time zone once you log in to the router successfully; otherwise, time-based functions will not take effect.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

This Article Applies to:
Archer C2( V5 )
Configuration Guide | Updated 11-01-2017 11:53:44 AM