[FAQ ID: 183]How to configure individual WEP key for individual wireless client on TP-LINK Wireless Router

Suitable for: 300Mbps Wireless N Routers, 150Mbps Wireless N Routers, 54Mbps Wireless G Routers, N750 Wireless Dual Band Routers, N600 Wireless Dual Band Routers, N900 Wireless Dual Band Routers

Step 1
Open the web browser and type the LAN IP address of the router in the address bar, the default IP address of TP-LINK router is 192.168.1.1. Press Enter.
 
Step 2
Type the username and password in the login page, the default username and password are both admin.
 
Step 3
Click Wireless->Wireless Settings on left page, enable Wireless Security and select Security Type as WEP.
 
Note: Please select Key2 and configure the password.
 
Step 4
Click Save to save the settings.
 
Step 5
Click Wireless->MAC Filtering on left page, enable Wireless MAC Address Filtering and select the Filtering Rules as Deny the stations not specified by any enabled entries in the list to access. Click Add New to configure the detailed rule.
 
Step 6
Input the wireless adapter’s MAC address which you would like to connect the wireless network with an individual password, select Privilege and configure WEP key. The key is just for the computer with the configured MAC address.
 
Step 7
Click Save to save settings.
 
Step 8
Click Add New to configure new password for other computers.
After setting different WEP keys for different computers, different passwords will be required when connecting to the wireless network. For example, we configure WEP key 0123456789 for pc1 and configure WEP key 1234567899 for pc2 as the screenshot below. When pc1 connects to the wireless network, it requires password 0123456789. When pc2 connects to the wireless network, it requires password 1234567899.