[FAQ ID: 417]How to Configure TP-LINK N router as a wireless Access Point?

Suitable for: 300Mbps Wireless N Routers, 150Mbps Wireless N Routers, N750 Wireless Dual Band Routers, N600 Wireless Dual Band Routers

The article is based on the condition that you already have a router and only want TP-LINK router to extend the wireless network range via a LAN cable. We don’t need WAN port on the TP-LINK router in this network.

Step 1
Connect the main router to the LAN port on TP-Link router through Ethernet cable.
 
Step 2
Connect your computer to anther LAN port through Ethernet cable, then login to TP-LINK web interface through the IP address on the bottom label by the following tips:
 
Step 3
Go to Network ->LAN on the left side menu,change the LAN IP address of TP-LINK router to the same LAN of the main router.( For example, if your main router gets the IP address of 192.168.2.1, 192.168.2.X (1<X<254) is recommended for TP-LINK router.)
After that, it would require a Reboot. Please click OK to reboot and then relogin to TP-LINK page with the new IP address
 
Step 4
Configure the wireless
Go to Wireless->Wireless Settings page, configure the SSID (Network name) and Channel. (If it is a dual band device, please don’t forget to select the Band.) Click Save button.
 
Go to Wireless->Wireless Security page, configure the wireless security. Here WPA-PSK/AES is recommended. PSK Password is the key of your wireless.
 
Step 5
Go to DHCP on the left side menu, disable the DHCP Server and click Save button.
 
 
 
Step 6

Go to System Tools->Reboot page, click Reboot button to reboot the device.

After all of the tips above, your computer would have internet through any LAN ports of TP-LINK by an Ethernet cable. At the same time your wireless client would have access to the TP-LINK wirelessly through the SSID and Password pointed at FAQ 256.

Print E-mail Close Top Back to FAQ Views: 393220