FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  •  Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally V1.x=V1)
    How to find the hardware version on a TP-Link device?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • Do NOT upgrade the firmware through wireless connection unless there is no LAN/Ethernet port on the TP-link device. For LTE-MiFi, it is recommended to upgrade via USB port.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
T3700G-28TQ(UN)_V1_160112
Published Date: 2016-01-12 Language: English File Size: 5.36 MB
Modifications and Bug Fixes
New Features/Enhancement                       1.fixed the stacking failure problem by NTP settings.           2.Improved Stability
Notes
For T3700G-28TQ V1.
T3700G-28TQ_V1_20150313
Published Date: 2015-03-13 Language: English File Size: 5.36 MB
Modifications and Bug Fixes
Enhancement:
1.Improved the stability of stacking feature.
Bug fixed:
1.Fixed the bug that when more than 2 ports are enabled LACP and the peer switch has one port with LACP disabled,the port status is suggested to be set as 0x5.
2.Fixed the bug that the hardware routing table of the stacking system crashes after 
about twenty minutes if there is a large number of ARP entries transferring frequently.
3.Fixed the bug that aggregated ports act abnormal after changing unit ID.
4.Fixed the bug that when stacked T3700 acts as an DHCP server,its routing table can not transfer correctly when a large number of clients renew/release dynamic IP address frequently.
5.Fixed the bug that process hangs out when two PCs managing T3700 and checking the routing table using telnet simultaneously.
 
 
Notes
1. For T3700G-28TQ_V1
2. Old firmware’s configuration file can be imported into this new firmware.
3. Your device’s configuration won't be lost after upgrading, which means you needn't to configure your device again after upgrading.
 
 
T3700G-28TQ_V1_MIB_150313
Published Date: 2015-03-13 Language: English File Size: 122 KB
Notes
For T3700G-28TQ V1 150313 and subsequent versions. 

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-LINK partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-LINK products for direct download and further information, including a list of TP-LINK software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

802.1X Client

Published Date
2016-03-25
Language
English
File Size
5.5 MB
Operating System
Win2000/XP/2003/Vista/7/8/8.1/10

MIBs Files

Published Date
2016-01-12
Language
English
File Size
127 KB
Operating System
Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux
Notes
For T3700G-28TQ_V1_160112.
Published Date
2015-03-13
Language
English
File Size
122 KB
Operating System
Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux
Notes
For T3700G-28TQ V1 150313 and subsequent versions. 

Emulators

Firmware Version
Working Mode
Language
150313
-
English
T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code: